Javascript required
Skip to content Skip to sidebar Skip to footer
Home / Finding Molarity of a Solution With Absorbance

Finding Molarity of a Solution With Absorbance

Download Article

Download Article

Molar absorptivity, also known as the molar extinction coefficient, is a measure of how well a chemical species absorbs a given wavelength of light. It allows you to make comparisons about the probability of electrons transition between levels for different compounds without taking into account differences in concentration or solution length during measurements.[1] It is commonly used in chemistry and should not be confused with the extinction coefficient, which is used more often in physics. The standard units for molar absorptivity are liters per mole centimeter (L mol-1 cm-1).[2]

  1. 1

    Understand the Beer-Lambert law for absorbance, A = ɛ x l x c. The standard equation for absorbance is A = ɛ x l x c, where A is the amount of light absorbed by the sample for a given wavelength, ɛ is the molar absorptivity, l is the distance that the light travels through the solution, and c is the concentration of the absorbing species per unit volume.[3]

    • Absorbance can also be calculated using the ratio between the intensity of a reference sample and the unknown sample. It is given by the equation A = log10(Io/I).[4]
    • Intensity is obtained using a spectrophotometer.
    • The absorbance of a solution will change based on the wavelength that is passed through the solution. Some wavelengths will be absorbed more than others depending upon the makeup of the solution. Remember to state which wavelength is being used for your calculation.[5]

  2. 2

    Rearrange the Beer-Lambert equation to solve for molar absorptivity. Using algebra we can divide absorbance by the length and the concentration to get molar absorptivity on one side of the equation: ɛ = A/lc. We can now use this basic equation to calculate molar absorptivity for a given wavelength.

    • Absorbance between readings can vary due to the concentration of the solution and the shape of the container used to measure intensity. Molar absorptivity compensates for these variations.[6]

  3. 3

    Obtain values for the variables in the equation using spectrophotometry. A spectrophotometer is a piece of equipment that passes a specific wavelength of light through a substance and detects the amount of light that comes out. Some of the light will be absorbed by the solution and the remaining light that passes through can be used to calculate the absorbance of that solution.

    • Prepare a solution of known concentration, c, for analysis. Units for concentration are molar or moles/liter.[7]
    • To find l, measure the length of the cuvette, the piece that holds the liquid samples in the spectrophotometer. Units for path length are measured in centimeters.
    • Using a spectrophotometer, obtain a measurement for absorbance, A, at a given wavelength. The unit for wavelength is meters, but most wavelengths are so small, they are actually measured in nanometers (nm).[8] Absorbance has no units.

  4. 4

    Plug in the values for the variables and solve the equation for molar absorptivity. Using the values you obtained for A, c, and l, plug them into the equation ɛ = A/lc. Multiply l by c and then divide A by the product to solve for molar absorptivity.

    • For example: Using a cuvette with a length of 1 cm, you measured the absorbance of a solution with a concentration of 0.05 mol/L. The absorbance at a wavelength of 280 nm was 1.5. What is the molar absorptivity of this solution?
      • ɛ280 = A/lc = 1.5/(1 x 0.05) = 30 L mol-1 cm-1

  1. 1

    Measure the intensity of transmitted light through varying concentrations of solution. Make up three to four concentrations of one solution. Using a spectrophotometer, measure the absorbance of one concentration of solution at a given wavelength. Start with the lowest concentration of solution and move to the highest. The order isn't important, but keep track of which absorbance goes with which calculation.

  2. 2

    Plot the concentration versus absorbance on a graph. Using the values obtained from the spectrophotometer, plot each point on a line graph. For each individual value, plot the concentration on the X-axis and absorbance on the Y-axis.[9]

    • Draw a line between each of the points. If the measurements are correct, the points should form a straight line indicating absorbance and concentration are proportional to Beer's Law.[10]

  3. 3

    Determine the slope of the line-of-best-fit through the data points. To calculate the slope of the line you take rise divided by run. Using two of your data points, subtract the X- and Y-values from each other, then divide Y/X.

    • The equation for the slope of a line is (Y2 - Y1)/(X2 - X1). The point higher on the line is given the subscript 2, while the lower point is given the subscript 1.
    • For example: The absorbance at a .2 molar concentration is 0.27 and at 0.3 molar is 0.41. The absorbance values are Y-values, while concentrations are X-values. Using the equation for a line (Y2 - Y1)/(X2 - X1) = (0.41-0.27)/(0.3-0.2) = 0.14/0.1 = 1.4 is the slope of the line.

  4. 4

    Divide the slope of the line by the path length (depth of the cuvette) to calculate molar absorptivity. The final step to calculating molar absorptivity with data points is to divide by the path length. The path length is the depth of the cuvette used in the spectrophotometer.

    • Continuing our example: If 1.4 is the slope of the line and the path length is 0.5 cm, then the molar absorptivity is 1.4/0.5 = 2.8 L mol-1 cm-1.

Add New Question

  • Question

    What is Beer Lambert's law?

    Mohsin257

    Mohsin257

    Community Answer

    In simple words it states that light absorbed by the sample is directly proportional to the path length (l or x) and concentration.

  • Question

    Is the molar absorptivity constant, or does it change as the length of the cuvette changes?

    Community Answer

    It is constant. Units of molar absorptivity constant is in M^-1 cm^-1, which is essentially how much is absorbed per unit length. As the length of cuvette increases, more is absorbed as a whole, but the constant is independent of length of cuvette!

  • Question

    How do I know the path length?

    Mohsin257

    Mohsin257

    Community Answer

    It is known by sample compartment. Path-length is the area of the cell/sample compartment. It is mostly 1cm and depends on that compartment may be .5cm etc.

  • Question

    How do I calculate the concentration of the unknown?

    Community Answer

    Concentration is molarity. So you use Mol's/solute, which is the M=Mol's/ml.

  • Question

    How do I calculate molar concentrations?

    Community Answer

    Molarity is expressed in moles/liters. So find the number of moles using dimensional analysis, and then divide that by a volume measured in liters.

  • Question

    How do I find the absorbance of radiation?

    Community Answer

    Use the formula A = ebc, where A is absorbance, e is molar extinction coefficient, b is path length (cm), and c is concentration (mol/L).

  • Question

    Shouldn't the slope be multiplied by path length and not divided in the 4th method? The absorptivity will be more at 1 cm path length than at 0.5 cm, won't it?

    Community Answer

    The formula is A = ɛlc. To solve for ɛ you use the formula A/lc, but the slope or gradient is A/c. So solving for ɛ would be the gradient multiplied by 1/l or the gradient divided by l.

  • Question

    How do I calculate the absorbance?

    Community Answer

    In this procedure the absorbance is measured on a spectrophotometer. If, for some reason, you know all values except absorbance you can solve for it as A=e*l*c.

  • Question

    How do I calculate the concentration of an extract if I don't know the molar absorbity?

    Community Answer

    In this procedure, you're preparing solutions of known concentration for analysis. You can't solve for the molar absorptivity if you don't know the concentration.

  • Question

    How do I calculate the concentration from absorbance?

    Community Answer

    If you know the value of all variables except concentration, you can rearrange the equation as c = A/le.

Show more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit


Video

About This Article

Article SummaryX

To calculate molar absorptivity, make sure you first understand the Beer-Lambert law for absorbance. Then, rearrange the Beer-Lambert equation into an algebraic equation so you can solve for molar absorptivity. You can obtain the values for the variables in the algebraic equation by using spectrophotometry. Once you have the values, plug them in for the variables in your equation. Once those values are plugged in, solve the algebraic equation as you normally would. The answer you get is the molar absorptivity. If you want to learn how to calculate molar absorptivity with the line-of-best-fit, keep reading the article!

Did this summary help you?

Thanks to all authors for creating a page that has been read 691,798 times.

Did this article help you?

Finding Molarity of a Solution With Absorbance

Source: https://www.wikihow.com/Calculate-Molar-Absorptivity